SURE petcare DualScan Microchip Cat Flap Guide De Démarrage Rapide page 8

Warranty & disclaimer
Warranty: The SureFlap DualScan Microchip Cat Flap carries a 3-year warranty from the date of purchase, subject
to proof of purchase date. The warranty is restricted to any fault caused by defective materials, components or
manufacture. This warranty does not apply to products whose defect has been caused by normal wear and tear,
misuse, neglect or intentional damage. In the event of a part failure due to faulty parts or workmanship, the part
will be replaced free of charge during the warranty period only. At the manufacturer's discretion, a replacement
product may be provided free of charge in the case of a more serious malfunction. Your statutory rights are not
affected.
Disclaimer: The SureFlap DualScan Microchip Cat Flap incorporates selective entry and selective exit features
which have been designed to minimise the risk of intruder pets entering your house and to keep some of your pets
indoors only. However, it is not possible to fully guarantee the exclusion of all other animals in all circumstances. In
the rare event of an unauthorised animal gaining access to the house, or any pets experiencing an unintended exit,
Sure Petcare cannot accept liability for any damage, harm or inconvenience which may be incurred.
Disposal of Products and used Batteries: Either of these symbols on a product indicates it is
subject to the following legislation:
The Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE Directive) & The Battery Directive
2006/66/EC (as amended 2013/56/EU) require households to dispose of electrical products and waste batteries in
an environmentally responsible manner. These items should not be placed in household waste bins and must be
recycled at an appropriate recycling facility.
FCC compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment. This device has been designed and complies with the safety requirements for
RF exposure in accordance with FCC rule part §2.1093 and KDB 447498 D01
IC compliance: CAN ICES-3(B)/NMB-3(B): This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the
device.
To meet RF exposure guidelines, a separation distance of 200 mm should be maintained. This device complies with
the safety requirements for RF exposure in accordance with RSS-102 Issue 5 for portable use conditions.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Pour respecter les consignes d'exposition aux RF, une distance de séparation de 200 mm doit être maintenue. Cet
appareil est conforme aux exigences de sécurité concernant l'exposition aux RF selon la norme RSS-102, 5ème
édition, pour des conditions d'utilisation portable.
5