How to Operate WITHOUT the Timer:
1. Plug in the power cord into your 120 Volt electrical outlet.
2. Press the ON/OFF button to turn on the unit. The slow cooker will beep once, and the LED
panel will display 00:00.
3. Select the desired cooking mode by pressing the HIGH, LOW or KEEP WARM button. When
the desired cooking mode is selected, the unit will beep once, the LOW, HIGH or
KEEP WARM indicator light will illuminate to denote the selected cooking mode, and the
LED panel will display "On".
4. The slow cooker is now in operation and the default time is 24 hours. After 24 hours, the unit
will automatically switch to the KEEP WARM function for a maximum of 4 hours.
• During operation, you may change the time by pressing the TIMER UP or TIMER DOWN
button to the desired time that you would like the unit to continue.
5. The KEEP WARM setting light will turn on and the timer will switch to 04.00 and will start
to count down. This time can be adjusted at any time by pressing the TIMER UP or
TIMER DOWN button, but cannot be extended to more than 4 hours.
6. The slow cooker will beep for 5 seconds and will turn off automatically after the 4 hours or any
other time set.
NOTE: The cooking time may be increased or decreased at any time by pressing the TIMER UP
or TIMER DOWN button.
NOTE: Modes may be changed (HIGH, LOW, or KEEP WARM) at any time by pressing the
appropriate button and the selection will light up.
NOTE: Press the ON/OFF button at any time to turn off the slow cooker.
If at any time you need to remove the porcelain pot from the unit, first remove the lid hinge
v
from the lid hinge base and then take out the porcelain pot carefully, using potholders.
7