Control Panel - IKEA FRYSA Mode D'emploi

ENGLISH

Control panel

1
ON/OFF switch
1
Display
2
Function button / Reset alarm
3
Temperature regulator
4
Door open alarm indicator
1
Positive or negative temperature indi-
2
cator
Temperature indicator
3
Fast Freezing indicator
4
Switching on
After plugging the plug into the power out-
let, if the display is not illuminated, press
ON/OFF switch, appliance on.
As soon as the appliance is turned on, the
following signals will appear on the control
panel:
• Positive or negative temperature indica-
tor will be positive, indicating that the
temperature is positive
• the Temperature indicator flashes, the
background of the display is red and you
will hear a buzzer.
Press Function button and the buzzer will go
off (also see "High temperature alarm" ).
Place the Temperature regulator in a mid-
dle position, and the appliance will be set
up to provide the following temperature:
roughly -18°C in the freezer.
2
Display
1 2 3
Functions Menu
Each time Function button is pressed, the
following functions are activated in a clock-
wise direction:
• Fast Freezing function
• no symbol: normal operation.
Switching off
The appliance is shut off by pressing ON/
OFF switch for more than 1 second.
After this, a countdown of the temperature
from -3 -2 -1 will be shown.
When the appliance is switched off, Display
also goes off.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature regulator sit-
uated at the top of the cabinet.
To operate the appliance, proceed as fol-
lows:
• turn the knob clockwise to obtain the
maximum coldness
• turn the knob counter- clockwise to ob-
tain the minimum coldness.
3 4
4
8