Operating Instructions - Robland D-510 Mode D'emploi

Operating instructions

The following recommendations for safe working procedures are given as an example, on top
of all information characteristics of this machine.
When working with the machine, safety equipment must be used.
Nevertheless, the user must also follow the operating instructions to avoid accidents.
TRAINING OF MACHINE OPERATORS
It is absolutely essential that the machine operator receives thourough training regarding operating
and adjusting the machine.
In particular:
The risks involved in working with the machine;
The operating principles, the correct usage and adjustment of the machine;
The correct choice of the tool for each operation;
The safe handling of the parts to be processed;
The position of the hands in relation to the sawblade;
Storing the workpieces safely before and after machining them
STABILITY OF THE MACHINE
In order to be able to use the machine safely, it is essential to place it stable on the ground.
ADJUSTMENT AND INSTALLATION
Disconnect the machine from the power supply before every adjustment.
The recommendations of the machine manufacterer must be followed when adjusting
and installing the tools.
The tools must be suited to the material being cut to assure safe and efficient sawing.
The tools must be correctly sharpened and installed.
HANDLING OF TOOLS
In order to avoid severe cuts, safety measurements, such as the wear of safety gloves, must be
taken when handling sawblades, or other tools you are using in your workshop.
Even blunt tools can cause serious injuries to your hands.
40
Nederlands Français English Deutsch
V0214 D 510