Publicité
Les langues disponibles
Les langues disponibles
9. Trouble shooting
• Any electrical work should be carried out by a qualified and skilled technician.
• The appliance must be repaired by an accredited repair centre, using only the manufacturer's
GB
original replacement parts.
• The appliance is designed for home use only. The manufacturer accepts no liability whatsoever
in the case of any other use.
10. Installation instructions
Before Using Your Wine Cooler
• Remove all exterior and interior packing.
• Before connecting the wine cooler to the power source, let it stand upright for approximately
24 hours.
• This will reduce the possibility of a malfunction in the cooling system caused by handling
during transportation.
• Clean the interior surface with a soft cloth moistened in lukewarm water.
Installation your appliance:
• This device is not designed to be built into fitted kitchen units
• The appliance should be positioned in a well-ventilated, dry room.
• Place your wine cooler on a flat surface that is strong enough to support it when it is fully
loaded. To level your wine cooler, adjust the front feet at the bottom of the wine cooler.
• This appliance must be fixed at the top and bottom using the rail provided for this purpose in
order to avoid any risk of tipping when the shelves are pulled out.
• Locate the wine cooler away from direct sunlight and sources of heat (stoves, heaters, ra-
diators, etc.). Direct sunlight may affect the acrylic coating, and heat sources may increase
electricity consumption. Extremely cold ambient temperatures may also cause the unit to not
function properly.
• Plug the wine cooler into an exclusive, easily accessible plug socket. Any questions concerning
power and/or earthing should be directed to a qualified electrician or an authorized product
service centre.
• To prevent the appliance from heating up, ensure there is an adequate gap for ventilation gap
between the appliance and the wall. Install a suitable thermal insulation panel if necessary.
An adequate flow of air to and from the cooling system must be ensured.
• The appliance must be connected to all electrical, plumbing, water and drainage connections
in accordance with national and codesregulations.
Please note that on first use an alarm may sound after the appliance is plugged
in as the humidity and temperature are incorrect. Without consuming power, the
humidity and temperature will reach the setting range (40-80%, 5-20°C). You
can press any button to stop the alarm.
92
Publicité
