Publicité
Les langues disponibles
Les langues disponibles
6. Cleaning and maintenance
• Before maintenance, switch off the power supply and disconnect the appliance.
• When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.
• Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
7. Important installation information
• To ensure the appliance is connected properly to the electricity supply, follow the recommen-
dations in this manual.
• Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or sales outlet of any damage. In this case, keep the packaging.
• It is recommended that the appliance be allowed to settle for at least 4 hours before it is
connected to the electrical power supply in order to ensure the correct flow of fluid, in the
compressor.
• Proper air circulation is required to avoid overheating. To ensure sufficient ventilation, follow
the installation recommendations provided.
• In order to avoid the risk of fire, ensure wherever possible that the appliance is not in contact
with walls or with any heating elements (compressors, condensers). Follow the installation
recommendations.
• The appliance should not be placed close to radiators or cooking hot plates or gas rings.
• Check that the electrical sockets are still accessible when the appliance is installed.
8. Saving energy
To limit the electricity consumed by your appliance:
• Install it in an appropriate place (see "Installing your appliance").
• Leave the doors open as little time as possible.
• Do not put hot food inside the appliance.
• To ensure that the appliance operates properly, clean the condenser regularly (see "Routine
maintenance of your appliance").
• Regularly inspect the door seals and ensure that they close properly. If this is not the case,
contact your after-sales service.
91
GB
Publicité
