Beurer Bm 19 Mode D'emploi page 18

These specification are subject to change without notice for
purpose of improvement.
Adapter
Model No. FW7333SM06
Input 100-240V, 50-60Hz
Output 6V DC, 1150mA, only in connection with
beurer blood pressure monitor
Supplier Friwo Gerätebau GmbH
Protection This device is double insulated and pro-
tected against short circuit and overload by
a primary thermal fuse.
The green LED lights under normal
conditions.
Make sure to take the batteries out of the
compartment before using the adapter
double insulated /
equipment class 2
Enclosures and Equipment enclosed to protect against
Protective Covers contact with live parts, and with parts
which can become live (finger, pin, hook
test).
The operator shall not contact the patient
and the output plug of AC adaptor simulta
neously.
This unit is in line with European Standard EN60601-1-2 and
is subject to particular precautions with regard to electro-
magnetic compatibility (EMC). Please note that portable and
mobile HF communication systems may interfere with this in-
strument. For more details, please contact customer service
at the address indicated.
The instrument is in line with the EU Medical Products
Directive 93/42/EC, the German medical products act and
European standards EN1060-1 (non-invasive blood pres-
sure monitors, Part 1: general requirements) and EN1060-3
(non-invasive blood pressure monitors, Part 3: Supplemen-
tary Requirements for Electromechanical Blood Pressure
Measure ment Systems).
If you are using the instrument for commercial or economic
purposes, you must check measurement precision regularly
in accordance with the ‚Operators' Ordinance on Medical
Products'. Even in the case of private use, we recommend
checking measurement precision every two years at the
manufacturers.
18