dji RONIN-S Guide De L'utilisateur page 7

Control Settings
•
Set the deadband, speed, smoothing, and endpoint of the pan, tilt, and
roll axis. Reassign channels and reverse the rotation of the pan, tilt, and
roll axis.
Create Feature
•
Panorama: Set the parameters according to the type of camera and
select "Quick Start". Set the Start and End position and the camera starts
to create the Panorama. The number of photos taken and the percentage
complete is displayed while shooting.
Timelapse: Set the parameters according to the type of camera and
select "Quick Start". Set the Start and End position and the camera starts
to create the Timelapse. The Start and End position can be the same or
different. The number of photos taken, the percentage complete, and the
elapsed time is displayed while shooting.
Toggle the 5D button to the left will exit the shooting.
Settings
•
Reset Bluetooth passwords, switch languages, perform a balance test,
calibrate the system, and restore default settings.
About
•
Displays information about the device, battery, and firmware version.
The Command Unit firmware is part of the Ronin-S firmware. When new
firmware is available, connect the Command Unit to the Ronin-S to update.
Refer to the Ronin-S User Manual for more information about the
gimbal settings.
Specifications
Screen Dimension: 1.4 inch
Resolution: 320×320
Lightness: 550 nits
5