LaserLiner DigiLevel Compact Mode D'emploi page 13

7
Gradient function
Preset gradients of 1%, 2%, 3% and 4% can be set using
the button (3). Keep pressing the button until the required
value is displayed. The gradient function is switched off by pressing
and holding button (3).
8 Acoustic signal
The acoustic signal can be switched on or off with button (6).
When the angle of slope stands at 0°, 45°, 90° or the most recently
stored value, this is indicated by an acoustic signal.
!
When working with a changed angle reference value,
the acoustic signal is activated on reaching the new reference
value (0°, 45°, 90° display).
AUTO OFF function
In order to preserve the batteries, the measuring device switches off
automatically if it is left idle for 10 minutes. Backlighting switches
off after 1 minute.
Data transfer
The device features a Bluetooth
wireless data transfer to mobile devices with a Bluetooth
interface (such as a smartphone or tablet).
The system prerequisites for a Bluetooth
specified at http://laserliner.com/info?an=ble
The device can set up a Bluetooth
Bluetooth 4.0 compatible devices.
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Once it has been activated, Bluetooth
nitely as the radio system is designed with exceptionally low power
consumption.
A mobile device can link up to the active measuring device via
an app.
* The Bluetooth
®
Bluetooth SIG Inc.
word mark and the logo are registered trademarks of
DigiLevel Compact
function that enables
®*
connection are
®*
connection with
®*
remains switched on indefi-
®*
®*
13
EN