Bosch TES502 Serie Mode D'emploi page 41

If the water ilter is activated, the
display will prompt you to remove the ilter
Remove the ilter now if you have not
Fill descaler
Press start
●
●
Calc'nClean in progress
The descaling pro gramme will now run for
about 1 0 minutes.
Place container
Pull milk frother
●
●
Calc'nClean in progress
The descaling pro gramme will now run for
about 1 2 minutes.
Clean / Fill water tank
Press start
● Rinse the water tank (16) and reill it with
●
Calc'nClean in progress
The descaling pro gramme now runs for
about 3 0 seconds and rinses the appliance.
Push milk frother
●
Calc'nClean in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
●
Replace the ilter if one is being used. The
appliance has inished cleaning is ready for
contain salts. Salts can cause rust ilm
¡ T o a v o i d d a m a g e f r o m l o w
t e m p e r a t u r e s d u r i n g t r a n s p o r t
a n d s t o r a g e , t h e a p p l i a n c e m u s t
be completely emptied irst.
and the water tank (16) illed.
h button (11).
button (11) lashes and the
The h
Pull milk frother.
3 . Open the milk frother ( 6 ) by pulling it out
and release steam for about 1 5 seconds.
4 . Switch the appliance off at the power
on/off switch O / I ( 9 ) .
5 . Empty the water tank ( 1 6 ) and the drip
tray ( 8 ) .