Bosch TES502 Serie Mode D'emploi page 40

Clean required! appears
on the display, press the e off /
(12) for 3 seconds and then press the
button (10).
The cleani n g programme wi l l start.
To clean the appli a nce before bei n g
prompted, press the
at least 3 seconds. Then press the
button (12) briely twice. Turn the upper
appears in the display.
To start the cleaning procedure, press the
start button ( 1 0 ) .
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
●
Cleaning in progress
The appliance rinses twice.
Open drawer
●
Fill cleaner
●
Cleaning in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
●
The appliance has inished cleaning is
j button
start
e off / j button (12) for
e off / j
Start cleaning
If there is a ilter in the water
Calc'nClean required!
appears on the display, press the e off /
button (12) for 3 seconds and then
the start button (10).
The servi c e programme wi l l start.
To run Calc'nClean before bei n g prom
press the e off / j button (12) for at le
3 seconds.
Then press the e off / j
Start Calc'nClean appears in the display.
To start Calc'nClean, press the start button
( 1 0 ) .
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
●
Calc'nClean in progress
The appliance rinses twice.
Open drawer
●
Fill cleaner
●
j
button (12) briely