Bosch TES502 Serie Mode D'emploi page 39

If there is a ilter in the water
Descale required! appears
on the display, press the e off /
(12) for 3 seconds and then press the
button (10). The descali n g programme wi l l
start.
To descale the appli a nce before bei n g
prompted, press the
at least 3 seconds. Then press the
button (12) briely twice. Turn the upper
appears in the display.
To start the descaling procedure, press the
start button ( 1 0 ) .
The display will guide you through the
programme.
Empty drip tray
Insert drip tray
●
If the water ilter is activated, the
ilter and then press the
again. Remove the ilter now if you have
Fill descaler
Press start
●
●
Descale in progress
The descaling pro gramme will now run for
about 1 0 minutes.
j button
start
e off / j button (12) for
e off / j
Start descaling
Place container
Pull milk frother
●
●
Descale in progress
The descaling pro gramme will now run for
about 1 2 minutes.
Clean / Fill water tank
Press start
● Rinse the water tank (16) and reill it with
●
Descale in progress
The descaling pro gramme now runs for
about 3 0 seconds and rinses the appliance.
Push milk frother
●
Descale in progress
The descaling pro gramme now runs for
about 1 minute.
Empty drip tray
Insert drip tray
●
Replace the ilter if one is being used.
contain salts. Salts can cause rust ilm