Marshalltown TC17 Mode D'emploi page 6

To cut an angle:
1. Place tile at desired angle and place the guide
against the tile.
3. Flip the breaker down and position slightly away
from the front edge of the tile.
6 of 8
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
2. Carefully lower wheel until it makes contact with
tile and then apply consistent pressure while
scoring full length of the tile.
4. Apply increasing downward pressure on handle
until the tile snaps.
WS2769