Hints And Tips - IKEA SMAKLIG Mode D'emploi

ENGLISH
Heat setting
-
-
If cookware that is not suitable is
used, lights up in the display
and after 2 minutes the indicator
for the cooking zone switches
itself off.
OffSound Control (Deactivation and
activation of the sounds)
Deactivation of the sounds
Deactivate the appliance.

Hints and tips

Noises during operation
When a cooking zone is switched
on, it may hum briefly. This is a
characteristic of all ceramic glass
cooking zones and does not
impair either the function or the
life of the appliance.
Cookware for induction cooking zones
Use the induction cooking zones
with correct cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-
layer (with correct mark from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if ...
Automatic switch off
after
5 hours
4 hours
1.5 hours
Touch for 3 seconds. The displays come
on and go out. Touch
comes on, the sound is on. Touch
comes on, the sound is off.
When this function operates, you can hear
the sounds only when:
• you touch
• you put something on the control panel.
Activation of the sounds
Deactivate the appliance.
Touch for 3 seconds. The displays come
on and go out. Touch
comes on, because the sound is off. Touch
, comes on. The sound is on.
• ... some water boils very quickly on a
zone set to the highest heat setting...
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must
be as thick and flat as possible.
Cookware sizes
Induction cooking zones adapt
automatically to the size of the bottom of
the cookware. But, it must have a minimum
diameter depending on the size of the
cooking zone.
Cooking zone
Right rear cooking
zone
12
for 3 seconds.
,
for 3 seconds.
Minimum diameter
of cookware base
[mm]
145