Publicité
Les langues disponibles
Les langues disponibles
8785081
8.
Do not use the welding unit if personal movement is confined or if there is a
danger of falling.
9.
Keep all panels and covers securely in place when operating the welding unit.
10. Insulate the ground clamp when not connected to a workpiece to prevent
contact with any metal object.
11. Do not operate the welding unit if the torch, electrode holder, welding cable or
ground cable are wet. Do not immerse them in water. These components and
the welding unit must be completely dry before attempting to use them.
12. Never dip the electrode in water for cooling.
13. Remove the electrode from the holder when not in use.
14. Do not point the torch or electrode holder at any body part of yourself or at
anyone else.
15. Do not use a welding unit to thaw frozen pipes.
16. Insulate yourself from the work and the ground using dry insulation. Make
certain that the insulation is large enough to cover your full area of physical
contact.
17. When not welding, make certain that no part of the electrode circuit is touching
the workpiece or the ground. Accidental contact can cause overheating and
create a fire hazard.
18. Maintain good ventilation of the louvers on this equipment. Good
ventilation is of critical importance for the normal performance and service
life of this equipment.
19. When working above floor level, use a safety belt to protect yourself from a
fall should you get a shock.
20. The electrode, electrode reel, welding head, nozzle and semiautomatic
welding torches are electrically 'hot' when the welding unit is in
semiautomatic or automatic wire welding mode.
21. The welder must be horizontal. An incline of 10º or less is acceptable.
FIRE AND EXPLOSION PRECAUTIONS
Arc welding can produce sparks, hot slag or spatter, molten metal drops and hot
metal parts that can start fires.
8
200A AC/DC Dial Control TIG Welder 202KE
For technical questions call 1-800-665-8685
V4.2
Publicité
