Publicité
Les langues disponibles
Les langues disponibles
V4.2
AC Pulse TIG
INTRODUCTION
The 200 AC/DC Dial Control TIG Welder 202KE produces smooth, stable arcs with
AC or DC circuits, making it the go-to option for serious DIYers and fabricators.
Among its many features are a digital-controlled display, easy, single knob
operation, AC/DC current and built-in thermal overload protection. It welds carbon
steel, cast iron, stainless steel, copper, aluminum alloy and magnesium alloy.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and
maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice
is an alert that there is a possibility of property damage, injury or death if certain
instructions are not followed.
DANGER!
This notice indicates an immediate and specific hazard that will
result in severe personal injury or death if the proper precautions
are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice that
could result in severe personal injury or death if the proper
precautions are not taken.
CAUTION!
This notice indicates a potentially hazardous situation that may result
in minor or moderate injury if proper practices are not taken.
Visit www.princessauto.com for more information
200A AC/DC Dial Control TIG Welder 202KE
Peak Current
Base Current
Exchange Frequency
(Balance) Cleaning Width
Pulse Frequency
Duty Cycle (10 min.)
Max. Metal Thickness
20～95A
50% Peak Current
50～150Hz
50%～85%
0.2～20Hz
35%
1/8 in.
8785081
20～200A
1/2 in.
3
Publicité
