Publicité
Les langues disponibles
Les langues disponibles
8785081
NOTICE!
This notice indicates that a specific hazard or unsafe practice will
result in equipment or property damage, but not personal injury.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit and
free of distractions.
2.
Remove all unnecessary people from the work area when welding.
Anyone remaining in the work area must wear the appropriate welding
safety equipment.
3.
Store tools properly in a safe and dry location. Keep tools out of the reach
of children.
4.
Do not weld on damp surfaces that can transmit the electric current
without taking precautions for the welder and bystanders. The electrode,
welding head and nozzle are electrically 'hot'.
5.
Do not install or use in the presence of flammable gases, dust or liquids.
6.
Welding sparks and ejected molten slag can start a fire. Remove
combustible materials within 39 ft (12 metres) of the welding unit. See Fire
and Explosion Precautions.
7.
Have a fire extinguisher readily available (see Fire and Explosion
Precautions).
8.
Erect protective screens or barriers to protect bystanders from the flash
and glare; warn others in the area not to watch the arc. Do not strike a
welding arc until all bystanders and you (the user) have welding shields
and/or helmets in place.
9.
Keep the welding unit at least one foot from any wall or structure.
10. Check that the work area is free from fires, sparks or hot debris
before leaving.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
4
200A AC/DC Dial Control TIG Welder 202KE
For technical questions call 1-800-665-8685
V4.2
Publicité
