Dimplex DF1135M Manuel Du Propriétaire page 10

Fireplace Installation
Figure 4
Figure 5
9. Insert the wall anchor screws
through the wall bracket and
thread into the wall anchors.
Tighten the screw (Figure 3).
10. Install the remaining screws
through the bracket and into
the wall studs as required.
!
NOTE: At least two of
the mounting screws must be
installed into a wall stud.
11. Remove the two (2) cover
plates from the wall mounting
slots in the back of the
firebox. (Figure 4)
10
Cover Plates
12. Mount the unit on the wall,
so that the tabs on the wall
bracket have been inserted
into the slots on the back of
the firebox. (Figure 5)
13. Mount hardware for frame in-
stallation to unit as described
in installation guide provided
with frame.
14. Carefully pour and evenly dis-
tribute the supplied media in
the Media tray of the firebox
(Figure 6).
15. Hang the frame assembly on
the mounting hardware of the
firebox and secure by follow-
ing the instructions included
with frame.
16. Excess electrical cord can be
inserted back into the bottom
of the unit, into the cord
storage area.
Figure 6
Media Tray
www .dimplex.com