Steelcase FrameOne Instructions De Montage page 12

®
NOTE: If receptacles are not required inside a power block and connections
are not being used, make sure to apply a receptacle cover to ALL open ports
and a cover to all open lines. See pages 3 and 4.
NOTE: Both ends of a modular harness need
to have strain relief brackets applied when
installing the "NO TRAY" option.
For strain relief installation,
see page 6.
NOTE: For benches with
simple tray, remove the
lower portion.
For NO TRAY option
NOTE: Pinch as indicated to engage into
bottom of power support channel or slide
part in by angling at notched end of power
support channel.
Part will be loose and able to move.
Page 12 of 84
1061950001 Rev C