INNOBIZ Simplia n 2 Mode D'emploi page 3

Tips for Use :
EN
Carefully insert the glass flask (No.2) into the wooden base. Then insert the stop-
per (no.3) into the glass flask. Finally, connect the adapter to the mains socket
(220-240V). WARNING: before inserting or removing the glass flask (no.2) make
sure you have removed the rotatable nozzle (no.3) to avoid any risk of breaking.
The blown glass parts are very fragile.
Put a volume of about one or two teaspoons of essential oils or a blend of essen-
tial oils into the glass diffuser.
The diffuser is now ready to operate.
Maintenance:
For its proper functioning, it is imperative that the essential oil diffuser be clea-
ned using a special cleaning agent.
Clean your diffuser 1 to 2 times a month. To do this, empty
the essential oils from the diffuser, pour in approximately two teaspoons of the
cleaning agent and switch on your diffuser for 3 to 5 minutes. Once this time
has passed, pour off the excess cleaning agent.You can start diffusing essential
oils again.
Noise and Vibration
To reduce noise as much as possible and enjoy the Simplia electric diffuser in
complete tranquillity, we suggest you try it on different bases. Carpet, fabric,
wood or tiles could reduce or increase the noise emitted by the pump. To avoid
any possible vibration of the glass stopper fitted into the glass flask, loosen the
flask a little from the wooden base. Delicately pull the glass flask while gently
turning it a few degrees to the left and right (do not rotate it far as this could risk
damaging the joint).
Content :
- Blown glass diffuser
- 1 diffuser nozzle that can be rotated 360°
- 1 wood base housing electrical pump
- 1 electrical adapter and 1 set of instructions for use
Technical features
Essential oil diffuser in wood and blown glass.
Variable diffusion power.
Diffuser: H = 250 mm, D = 100 mm
Power supply: Mains 220V - 50 Hz – EC STANDARD
3