Sylvania ST88246 Guide D'utilisation page 45

4) You may select a command from the following chart:
* For Memo Record and Greeting Message Record function, the first time you enter
the corresponding command, it starts the Recording function. If you want to stop the
recording, enter the command again.
5) After all of the Voice Prompts menu has played, you hear intermittent beeps
indicating that the system is in the command waiting mode. You may enter another
command at this time from the chart above.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
NOTE:
You must enter a command within 15 seconds of entering command waiting mode or
the answering system automatically hangs up and returns to standby.
M Turn on the answering system remotely
If you have forgotten to turn on your answering system, you can turn it on remotely from
any touch-tone telephone.
1) Call your telephone number.
2) Wait ten rings until the system answers. You hear intermittent beeps.
3) Press 0 and then enter your PIN code. The answering system announces the
current time and the number of messages stored in memory. You hear
"To play incoming messages, press zero two. For help, press one zero".
4) Press 0 then 6 to turn the answering system on. You hear the outgoing message
and a tone.
5) Hang up the phone and subsequent calls will be answered by the system.
40
Command
0 then 1 Repeating a Message
0 then 2 Playing Incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation
0 then 6 Answering System On
0 then 7 Memo Record/Stop*
0 then 8 Greeting Record/Stop*
0 then 9 Answer System Off
0 then 0 Voice Prompts
Function