Sylvania ST88246 Guide D'utilisation page 14

INSTALLING THE HANDSET BATTERY PACK
1) Remove the handset battery cover by
pressing in on the cover release and
sliding it downward.
2) Connect the battery pack connector with
the correct polarity (black and red wires),
then insert the battery pack into the
battery compartment.
NOTE: The plastic connectors will fit
together only one way. Make
sure the battery's connector is
properly aligned. Use only the
supplied battery pack
(model BT-905).
3) Slide the battery cover on until it snaps
into place.
Red
Black
Red Black
Wire Wire
9