Sylvania ST88246 Guide D'utilisation page 35

M Setting the Time
The clock on the phone answering system starts when power is supplied to the base.
Follow these steps to set the clock to the correct time.
1) Press MENU/CLOCK. The system announces
"Time" and the current time. The message
counter displays the current numbers ([
through [
2) Press or
correct day is announced. The numbers [
through [
3) Press SET to select the day.
4) Press or
numbers [
5) Press SET to select the hour.
6) Press or
numbers [
announced.
7) Press SET to select the minute.
8) Press or
message counter displays [
9) Press SET to select the AM/PM.
You hear a confirmation tone. The phone announces "Time", and the time and day
for your review.
NOTES:
• Normally the idle time for the menu mode is 10 seconds before the system returns to
standby. However for setting the time, the idle time is extended to two minutes.
• Press and hold
display.
30
]) indicating the day of the week.
/VOLUME/SELECT until the
] are displayed on the base.
/VOLUME/SELECT until you hear the correct hour setting. The
] through [ ] are displayed on the base as each hour is announced.
/VOLUME/SELECT until you hear the correct minute setting. The
] through [ ] are displayed on the base as each minute is
/VOLUME/SELECT until you hear the correct AM or PM setting. The
]or [
/VOLUME/SELECT
or
]
]
].
to quickly scroll through numbers on the