Sylvania ST88246 Guide D'utilisation page 20

MEMORY DIALING
STORING PHONE NUMBERS AND NAMES
Memory Dialing allows you to dial a number using just a few key strokes. Your ST88246
stores up to 10 names/numbers in the handset.
1) Press MEM then "
is displayed.
2) Press /VOL and
(0 - 9) to select the memory location where
you would like to store the number.
3) Press REMOTE/SELECT twice. The
following screen appears and a cursor
flashes indicating that the display is ready for
the name to be entered.
If this screen appears, the selected memory
location is already stored. Then you must
either change the entry in this location,
clear the entry in this location, or select
Go Back
" " to choose another location.
4) To enter a name (up to 13 characters), use the number keys.
•See the "Steps for entering names and special characters" (See page 16).
•Use #/ and
•Use CH/DELETE to delete characters as needed.
•Press and hold CH/DELETE to delete all the characters.
•If a name is not required, go to step 5.
5) Press REMOTE/SELECT. "
is displayed. The cursor flashes indicating
that the display is ready for the number to
be entered.
6) Use the number keys, #/
enter the phone number. The phone number
cannot exceed 20 digits.
Use PAUSE/REDIAL to enter a pause in the dialing sequence.
The display shows a "
second delay of time between the digits as they are sent.
Use CH/DELETE to delete digits as needed.
Select Memory
"
/VOL, or enter a number
/TONE/ to move the cursor to the desired location.
Store Number
or /TONE/
P
". Each pause counts as one digit and represents a two
S e l e c t M e m o r y
0 1
0 2
S t o r e N a m e
E d i t M e m o r y 0 2
D e l e t e M e m o r y 0 2
G o B a c k
"
to
15