Sylvania ST88246 Guide D'utilisation page 18

BASICS
MAKING AND RECEIVING CALLS
To answer Pick up the handset
a call (Automatic Call Connection: ON)
or pick up the handset and press
TALK/FLASH.
(Automatic Call Connection: OFF)
To make 1) Pick up the handset.
a call 2) Press TALK/FLASH.
3) Listen for the dial tone.
4) Dial the number.
1) Pick up the handset.
2) Dial the number.
3) Press TALK/FLASH.
Press END, or return the handset to the base
To hang up
(Automatic Call Completion).
1) Pick up the handset.
To redial
2) Press TALK/FLASH.
3) Listen for the dial tone.
4) Press PAUSE/REDIAL.
1) Pick up the handset.
2) Press PAUSE/REDIAL, then
press TALK/FLASH.
NOTE: Refer to page 22 "Setting Up Caller ID Options" to turn on Automatic Call Connection
if desired.
TEMPORARY TONE
In pulse dialing mode, you can access bank facilities, telephone answering machines,
etc., by pressing the
you to input the required tone codes. It will reset automatically to pulse dialing after you
end your call.
Handset On Base
OR
OR
/TONE/ key. This will get you into the tone mode and will allow
Handset Off Base
Press TALK/FLASH, any number,
/TONE/ or #/
(Automatic Call Connection: ON)
or press TALK/FLASH.
(Automatic Call Connection: OFF)
1) Press TALK/FLASH.
2) Listen for the dial tone.
3) Dial the number.
OR
1) Dial the number.
2) Press TALK/FLASH.
1) Press TALK/FLASH.
2) Listen for the dial tone.
3) Press PAUSE/REDIAL.
OR
Press PAUSE/REDIAL, then press
TALK/FLASH.
.
13