Sylvania ST88246 Guide D'utilisation page 29

M Reviewing Caller ID Numbers
Your phone stores the most recent 30 numbers in Caller ID memory. If the memory is
full, a new call replaces the oldest number. To review your Caller ID numbers, follow the
steps below.
1) Press CID/MENU, and the Caller ID summary screen
appears. The screen shows the number of new
callers and the total number of callers stored in Caller
ID memory.
2) Press /VOL to scan through the list. The most
recent call appears first with the date, time, call count,
name, and phone number. Press
through the list.
3) Press END to return to standby.
NOTE: The number of calls from the same Caller ID appears next to the
received time.
Once you read the new message, the number will disappear.
M Calling a Caller ID Number
1) Press CID/MENU, and the Caller ID summary screen
appears. The screen shows the number of new
callers and the total number of callers stored in Caller
ID memory.
2) Select the number that you would like to dial.
Press /VOL to scan forward and
back through the list.
NOTE: For long distance dialing, press 1 to add a "
display. Press 1 again to remove the "
Pressing 3 will set or cancel an area code setting.
3) Press TALK/FLASH and the number automatically dials.
NOTE: You cannot make a call from the Caller ID list if your ST88246 is connected
to a private branch exchange (PBX).
You can place a call from Talk Mode. Press the TALK/FLASH key, then press the
CID/MENU key. Select the phone number that you want to dial by pressing the
or /VOL key. Press the REMOTE/SELECT key.
The displayed phone number will be dialed.
24
/VOL to scan back
/VOL to scan
1-
1-
" from the display.
C a l l e r I D
N e w : 0 1
T o t a l : 0 2
C a l l e r I D
N e w : 0 1
T o t a l : 0 2
" to the number on the
/VOL