Sylvania ST88246 Guide D'utilisation page 37

M Selecting the message record time
You have three record time options. The options "1 minute" and "4 minutes" set the
duration for recording the incoming messages. "Announce only" answers the call with
the preset greeting or your personal greeting but prevents the caller from leaving
a message.
1) Press MENU/CLOCK four times.You hear "Record time" and the current recording
time ([
the base.
2) Press or
3) Press SET to select the new recording time. You hear a tone. The system
announces "Record time" and the new recording time.
M Announce only feature
The announce only feature plays a prerecorded outgoing message "Hello, no one is
available to take your call. Please call again.", but it will not allow the caller to leave a
message. To set "Announce only", follow the steps above.
Your system comes with a prerecorded announce only greeting; "Hello, no one is
available to take your call. Please call again."
To scroll between the prerecorded message or your own personal greeting, press OGM
when the outgoing message is played. If you want to use your own greeting, or you
want to change your greeting to omit the prompt "to leave a message", refer to
"Recording your personal outgoing message" on page 34.
32
] 1 minute, [ ] 4 minutes, [
/VOLUME/SELECT until the desired time appears.
] Announce only), and it is displayed on