Technical Info; Product Specifications - brondell SE600 Mode D'emploi

TECHNICAL INFORMATION

Product Specifications

BRONDELL SWASH ADVANCED BIDET SEAT
Model
Power Voltage
Power Consumption
Supply Water Pressure
Dimensions
Weight
Seat / Lid Weight Limit
Operating Temperature 37.4° F – 104° F
Mesh Filter
WARM WATER WASHING DEVICE
Rear Wash
Front Wash
Standard Time
Water Pressure Control 5 Levels
Water Temperature
Control
Heater Power
Consumption
Safety Devices
HEATED SEAT
Seat Temperature
Control
Heater Power
Consumption
Safety Devices
NOTE: The specifications listed above are subject to change without prior notice for reasons
of improving the product performance.
22
SE600-EW, SE600-RW
120 V, 60 Hz
660 W
14.2 psi – 106.6 psi
Elongated: 15.5 in x 20.87 in x 6.10 in
Round: 15.5 in x 19.5 in x 6.10 in
Elongated: 9.7 lbs / Round: 9.5 lbs
275 lbs. / 178 lbs.
0.43 in x 0.6 in diameter
Maximum .95 L/min., automatic nozzle self-cleaning
Maximum .95 L/min., automatic nozzle self-cleaning
Rear Wash: 2 minutes / Front Wash: 2 minutes
4 Levels: Off - incoming water temperature,
Low – 93.2° F, Medium – 98.6° F, High - 104° F
600W
Thermal Fuse, Thermostat, Water Level Sensor
4 Levels: Off - room temperature
Low - 95° F, Medium – 100.4° F, High - 104° F
55 W
Thermostat