brondell SE600 Mode D'emploi page 22

OPERATING THE SWASH
Using the SE600
Auto Mode
Pressing the "Auto Mode" button will initiate a one-minute
Rear Wash with the following parameters preset:
• Seat Temperature set to Medium
• Nozzle Oscillation (Move) on
• Water Pressure set to Level 3
• Water Temperature set to Medium
After the wash cycle is over, Auto Mode will initiate a
one-minute Warm Air Dry cycle on Level 2.
NOTE: All wash and dry settings are adjustable, while the
Auto Mode wash cycle is running, to suit your preferences
Eco Mode
In this mode the water in the tank and the seat
temperature will be heated to 30°C / 86°F when the
bidet is not in use. Once a person sits on the bidet the
Swash will revert to the last seat and water temperature
settings used. To select this option press and release
the "Eco Mode" button on the Seat Control Panel to
illuminate its indicator.
20