brondell SE600 Mode D'emploi page 19

OPERATING THE SWASH
SE600 Remote Control
1. Rear Wash Button
Press once to initiate a two-minute
rear wash.
2. Front Wash Button
Press once to initiate a two-minute front
(feminine) wash.
3. Warm Air Dry Button
Press once to initiate a two-minute warm
air dry cycle.
4. Stop Button
Press to stop all wash or dry functions
currently operating.
5. Nozzle Position Buttons
Press the arrow up and arrow down buttons
to adjust the nozzle position forward and
backward during a wash cycle.
6. Water Pressure and Dry
Temperature Indicators
These lights indicate the Water Pressure
setting during a wash cycle, and the dryer
temperature during a Dry cycle.
7. Water Pressure and Dry
Temperature Buttons
Press the "+" and "–" buttons to
increase and decrease the outgoing water
pressure to one of five settings. Pressing
these buttons while the Warm Air Dryer is
operating will adjust the drying temperature.
Settings will be saved for the next use.
8. Water Temperature Button
Press and release this button to adjust the
outgoing water temperature to one of four
settings (LO: 34° C / 93.2° F, MED: 37° C /
98.6° F, HI: 40° C / 104° F, and OFF). Settings
will be saved for the next use.
9. Seat Temperature Button
Press and release the "Seat Temp" button
to adjust the seat temperature to one of
four settings (LO: 35° C / 95° F, MED: 38°
C / 100.4° F, HI: 40° C / 104° F, and OFF).
Settings will be saved for the next use.
10. Water Temperature and Seat
Temperature Indicators
These lights indicate the water temperature
setting while a wash cycle is active, and
the seat temperature setting during all
other times.
11. Massage Button
Pressing this button while a wash is running
enables the water to repeatedly increase
and decrease in pressure in a pulsating
pattern. Press again to stop.
12. Auto Mode Button
Press this button once to initiate a one
minute rear wash cycle followed by a
one minute dry cycle. See Page 20 for
more information.
13. Move Button
Press to initiate nozzle oscillation (repetitive
forward and backward nozzle movement)
during either the Front or Rear Wash. Press
again to stop the oscillation.
14. Deodorizer Button
Press this button to activate a one-minute
Deodorizer cycle.
15. Battery Life Indicator
This indicator will light up when the
batteries are low. See Page 14 on how to
replace the batteries.
17