Installation Accessory - Carrier KJR-120X Manuel Du Propriétaire

1. Safety precaution
NOTE
• The specified cables shall be applied in the wiring.
No external force may be applied to the terminal.
Otherwise, wire cut and heating may occur and result
in fire.

2. Installation accessory

Select the installation location
Don't install at the place where cover with heavy oil, vapor or
sulfureted gas, otherwise, this product would be deformed that
would lead to system malfunction.
Preparation before installation
1. Please confirm that all the following parts you have been supply.
No.
1 Wire controller
2 Installation and owner's manual
3 Screws
4 Wall plugs
5 Screws
6 Plastic screw bars
7 Battery
8 The connective wires group
9 Screw
Name Qty.
1
1
3 M3.9×25 (For Mounting on the Wall)
3 For Mounting on the Wall
2 M4×25 (For Mounting on switch box)
2 For fixing on switch box
1
1 Optional
1 M4×8(For Mounting the connective wire group)
Remarks
2-GB