Operation - Dustcontrol DC 4000 PCB Traduction Des Instructions De Service D'origine

Masquer les pouces Voir aussi pour DC 4000 PCB:

Table des Matières

Les langues disponibles

Pressure generation and air flow

Operation

Connection

Connect the machine to an electrical outlet with a voltage as per the machine's rating

plate specifications. If using an extension cord, it must be water-resistant.

Filter cleaning:

The machine has a filter status indicator that lights up when the filter needs to be

cleaned or replaced. The filters must be cleaned 1-2 times a day with continuous use .

Cleaning the filter:

During filter cleaning, the machine should be running and the hose removed from the

suction pipe.

1. Press the connector sleeve against the black stop lug on the exhaust duct or

against the floor in order to produce maximum negative pressure in the cyclone.

Open and close the hatch on the side 3-6 times. Air flows into the machine and

cleans the filter by creating a reverse pulse.

2. Turn off the machine and let the material fall down. Reconnect the suction pipe.

3. Start the machine.

DC 4000, Art.nr. 94162-E

Table des Matières