FUAVE FV5010 Manuel D'instructions page 22

Operating
Use the fan only when:
- The fan is completed assembled;
- All the connections are tightened firmly;
- All the safety instructions have been observed;
- The fan is positioned on a stable and flat ground.
• Check whether the fan speed is set to
• Set the fan in the correct position.
• Insert the plug into an appropriate socket.
• Use the control button to choose the desired speed (
low,
2
• The fan will start operating and the LED lighting will turn on.
• If necessary, press the oscillation (swivel) knob (6): the fan will now swivel
in an angle of 45°. By pulling out this knob, you stop the oscillation
(swivel) function.
• To switch off the fan, set the On/Off button to 0
disrupt the operation for longer than a few minutes, then also remove
the plug form the socket.
medium,
TURBO
.
SILENT
turbo, silent).
off,
(off). If you want to
1 9