Publicité
Les langues disponibles
Les langues disponibles
CONTROLS AND FEATURES
1 SWITCHED OUT terminal (1 line)
Outputs the re-clocked signal. The input
signal currently selected is re-clocked and
output from this terminal.
NOTES:
• When the input signal from another Input Card
is selected for the monitor, the SWITCHED
OUT terminal outputs the re-clocked signal
whichever one you selected last from among
the inputs on this card.
• No signal is output when the monitor is turned
off or in stand-by mode.
2 HD SDI/D1 SDI, EMBEDDED AUDIO
signal input terminals (2 lines)
Accepts an SMPTE292M HD SDI signal
and an SMPTE259M D1 SDI signal.
Also accepts EMBEDDED AUDIO signals including up to 8 audio channels with the
sampling frequency of 48 kHz.
Select input by using INPUT SELECT button on the monitor.
Select IN 1 terminal: Press INPUT SELECT A (SLOT 1)/C (SLOT 2)/E (SLOT 3)
Select IN 2 terminal: Press INPUT SELECT B (SLOT 1)/D (SLOT 2)/F (SLOT 3)
The EMBEDDED AUDIO channel is controlled from the monitor. Refer to your Multi-
format Monitor instruction manual for more information.
NOTE:
• The type of signal coming through the IN 1 and IN 2 terminals are automatically recognized—HD
SDI or D1 SDI signal. Note, however, that input lines are not changed automatically.
3 AES/EBU audio output terminals (8 channels)
Outputs decombined AES/EBU audio signals.
NOTES:
• When the input signal from another Input Card is selected for the monitor, the input audio signal
selected last from among the inputs on this card and the audio channel selected at that time are
output.
• No signal is output when the monitor is turned off or in stand-by mode.
buttons.
buttons.
Front view
Rear view
3
Publicité
