Assembly Instructions; Displays; Speed/Rotation Speed Indicator; Fuel Tank Gauge - Carrera DIGITAL 124 Instructions De Montage Et D'utilisation

Assembly instructions

The Driver Display is connected to the Adapter Unit on one side; this
can be positioned at any place within the track layout.
4
5

Displays

1
1
LED-bar display for showing tank filling level or engine speed
2 5 yellow LEDs to display a maximum of 10 refuellings
3 One-digit LED segment display for car´s address and
race position
4 Control button
Speed/rotation
Speed indicator
1
1
3
With the refuelling function at the Control Unit being switched off, fig.
, or using the Pit Stop Lane 20030346, the Driver Display serves
1
as rotation speed indicator. This mode is indicated by lighting of the
middle yellow LED 2 . Depending on the position of the speed
6 7 8
controller´s tappet, fig. , the engine speed is shown via the LED-
2
bar display 1 . The LED segment display
race position.
2 3 4
1
4 3
With the refuelling function at the Control Unit being switched on,
fig. 1
5 6
level
Pit Lane. Flashing or lighting of the five yellow LEDs
maximum of 10 refuellings. (Each LED counts two refuellings). The
LED-bar display
For programming the tank fuel capacity please read the manual
of the Control Unit (20030352).
2 3 4
2
1
3 shows the respective

Fuel tank gauge

1
2
3 4
1
, the Driver Display provides information on the tank filling
7 8
1 and the number of refuellings 2 in combination with the
1 shows the real tank filling level.
2 indicate a
9