PRODUCT ASSEMBLY
NOTE: All assembly parts MUST be locked into position.
Attaching the hopper to the base
Align the bottom of the hopper to the top of the base
Insert the hopper, making sure that it fits perfectly into the base.
Rotate the hooper clockwise, locking it into position.
Attaching the lid to the hopper
Line up the two tabs on the underside of the lid to the arrows on the outside of the hopper.
Place the lid on top of hopper, push down, and then rotate clockwise to lock into position.
Attaching the bowl to the base
Slide the bowl into the slot on the front part of the base
Press down to lock the bowl hooks into place.
NOTE: Prior to programming, make sure to switch the main power button (on the underside of the base) to« I » ON
position. Position the feeder so that the LCD control panel is facing you. In order to set desired preferences, press
after completing each step. Pressing ENTER also allows you to return to start screen.
Set the time
NOTE: The clock will be blinking "12:00 AM".
Press
and the HOUR will start blinking.
Set the HOUR using and buttons.
If you need to change from A.M. (morning) to P.M (afternoon), keep scrolling and it will automatically change.
When the hour is correct, press
Use and buttons to set up the MINUTES, then press
Set the meal
Press and hold
Use and buttons to select meal 1, 2 or 3 then press
MEAL
will now be blinking. Use the and buttons to select SERVE or SKIP, then press
If you selected SERVE, set the HOUR that is now blinking, using and buttons.
When the HOUR is correct, press
Use the and buttons to set up the MINUTES, then press
Now the meal time has been set.
Set the meal amount
After you are finished setting the meal time, the AMOUNT icon will start blinking.
Use the and buttons to increase or decrease the amount of food you want to be dispensed at that time.
By selecting more bars, more food will be dispensed.
Each bar corresponds to approximate measurements of food that are dispensed.
o
1 Bar = ½ cup (about 50 gr / 1.76 oz )
o
2 Bars = ¾ cups (about 70 gr / 2.46 oz )
o
3 Bars = 1 ½ cups (about 90 gr / 3.17 oz)
o
4 Bars = 2 cups (about 110 gr / 3.88 oz)
o
5 Bars = 2 ½ cups (130 gr / 4.58 oz)
o
6 Bars = 3 cups (150 gr / 5.30 oz)
o
...
PROGRAMMING
and the MINUTES will start blinking.
. Once MEAL is blinking, release the
and the MINUTES will start blinking.
.
button.
.
.
9
.