Num'axes EYENIMAL NGDISCRO003 Guide D'utilisation page 10


Press when you are done.
Setting additional times and amounts

Press and hold

Repeat the above meal time and meal amount instructions for up to two additional meals, selecting the desired
meal number (1, 2 or 3) that you want to program.
Optional Manual Feeding

You can also choose to feed your pet manually at any time.

Press and hold the button for 3 seconds

The AMOUNT icon will appear and start blinking.

Press and buttons to increase or decrease the amount of food you want to dispense.

Press to set the AMOUNT. The motor should start rotating to start dispensing food.

Repeat if necessary.
NOTE: If despite following the above manual feeding instructions, the motor does not rotate after 5 seconds, an "Err"
message will appear on the LCD control panel. This indicates a jam in the dispensing mechanism. To clear this message
follow these instructions:

Switch the main power button to

Switch the main power button to

When the product displays an error message, the current time and feeding schedule information will need to
be re-entered using the above programming instructions.
NOTE: To prevent this error, always make sure the feeding bowl is NOT overfilled, especially in the parts between the
hopper and the bowl. The dispensing mechanism will jam if the feeding bowl is overly full while the Electronic Pet
Feeder keeps dispensing food.
CHANGING THE BATTERIES
NOTE: Your program settings are stored and will not be lost when you change the batteries.

You need to replace the batteries when the LOW BATTERY WARNING LIGHT lights up, OR after your
Electronic Pet Feeder has not been used for a long period of time.

To replace the batteries, follow the above "Battery Installation" instructions.
MAINTENANCE FOR YOUR PET FEEDER
NOTE: All components of the Electronic Pet Feeder are detachable for easy cleaning.

Hand-clean with a slightly damp cloth.

NEVER soak or immerse in water

Store in a cool, dry place away from sunlight.
A. Troubleshooting
Should your product stop working or develop a fault, first read this user's guide over, then check the batteries and
replace them if necessary. Also, make sure that you are using the product correctly.
If the problem persists, please contact your retailer or check out our FAQ section at www.numaxes.com. You can
also contact NUM'AXES at +33.2.38.69.96.27 or by e-mail at export@numaxes.com.
Depending on the extent of the malfunction, you may have to return your product for service and repair.
For all repairs, please supply the following:
-
the complete product
-
the proof of purchase (invoice or sales receipt)
If you omit one of these items, the After Sales Service will have to invoice you for any repair costs incurred.
to begin programming additional meals.
and wait 3 seconds.
« O » OFF
to restart the Electronic Pet Feeder.
« I » ON
MAINTENANCE
WARRANTY
10