VOLTCRAFT VC-12A Notice D'emploi page 31

Only to be used with mignon batteries.
The measuring instrument must not be used when it is open, i.e. with an
open battery compartment or when the battery compartment cover is
missing. Do not make measurements in damp rooms or under adverse
ambient conditions.
Unfavourable ambient conditions are:
- Wet conditions or high air humidity,
- Dust and flammable gases, vapours or solvent,
- Thunderstorms or similar conditions such as strong electrostatic
fields etc.
Any use, other than the one described above, may damage the product.
Moreover, this involves hazards such as e.g. short circuit, fire, electric
shock, etc. It is not allowed to modify or rebuild any part of the product!
Observe the safety instructions in their entirety!
Description of the Parts
(see fold-out page)
1 Analogue display with mirror scale
2 Calibration screw for scale pointer
3 0 Ohm calibration control for measuring resistance values
4 Rotary switch for setting the measuring functions
5 COM socket (reference measuring point, negative pole)
6 V/Ω/mA socket (positive pole)
7 Battery and safety compartment on the reverse side
30