Bimar HC501 Notice D'instructions page 21

If the device is not in use for long periods of time, remove the plug
from the plug point.
Description
Model with switch (type HC501) with adjustable thermostat
The heater is equipped with the following adjustment:
- Switch (A) located on the side to turn on the fan (turbo), turn on (
off (●)
-Switch (B) to adjust the three powers:
- 0= off
- " "/750W= hot low-power
- " "/1250W= comfortable
- " "/2000W= fast heat
The thermostat controls the operation of the appliance according to the
surrounding room temperature: it continuously warms up to the set
temperature, and then heats it only when the temperature decreases
and for the time it takes to return it to the set value. It is actuated with
its knob: if it rotates counterclockwise the fan heater will be off (MIN), if
fully clockwise is set to maximum temperature (MAX); In intermediate
positions runs at intervals. For the use of the air curtain operates in the
following way:

Before inserting the plug into the socket, check that: the switch is in
pos. "0" and the switch is in pos. "●".

Insert the plug into the socket.

Turn the selector to the desired position:

If desired, press the switch in pos. (

To switch off, turn the dial in pos. "0" and press the switch in pos.
"●" and remove the plug from the socket.
For long periods of inactivity, remove the plug from the socket.
LEANING AND MAINTENANCE
Warning: before cleaning the appliance, turn it off, unplug the plug from
the mains and wait until it cools down.
 Periodically check that the air inlet and outlet are not blocked by lint;
to clean use a vacuum cleaner if necessary, taking care not to damage
the heating element.
/
) to start the fan.
21
) or
/ .