– to avoid a circuit overload, do not operate another high wattage appliance on the same
circuit.
– if an extension lead is absolutely necessary, a 10 amp cable should be used. ensure
no one can trip over or unplug the extension lead. it must be fitted with an earth
connection.
the appliance must not be cleaned or maintained by
–
children, unless they are more than 8 years old and
supervised by an adult.
– never immerse the machine in water or other liquids, not even partially.
do not use the appliance if it is damaged, if it leaks,
–
or if the power cable is damaged. to avoid any risk of
electric shocks, do not dismantle your iron. Contact your
nearest after sales service dealer for servicing or repair.
– for any repair, contact an approved registered after-sales service centre, so that the
repair will be in accordance with the standards indicated in this instruction book.
– any repair done by an unauthorised person would cancel the warranty.
– once out of order, every appliance must be made unusable before being thrown
away. to this aim, the power cord must be cut.
– the press must be placed and used on a stable, heat resistant surface.
– only use cold water.
– do not put your hand between the steaming board and the heating plate while
ironing.
– do not touch the hot surfaces.
– let the machine cool down when you have finished ironing.
The steam generated is extremely hot and could cause serious burns.
the manufacturer reserves the right to makes changes and alterations to the product without prior notice.
5