Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
G
PS-10 USB CHARGING STATION
ITEM NO.
1418369
INTENDED USE
The USB charging station has 10 USB power outputs intended for charging suitable devices
(e.g. smartphones, tablets, etc.).
The USB charging station operates on an external power adapter included.
Always observe the safety instructions and all other information included in these operating
instructions!
Read through the operating instructions closely and carefully, and keep them for later refer-
ence. If you pass the product on to a third party, please pass on these operating instructions
as well.
Use other than that described above can lead to damage to the product and may involve
additional risks such as, for example, short circuits, fire, electrical shocks etc. No part of the
product may be modified or rebuilt, and the housing must not be opened!
This product complies with the applicable National and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
PACKAGE CONTENTS
• USB charging station
• Mains adapter with mains cable
• 4x USB A/micro USB cable (length 0.15 m)
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item number
into the search field. After submitting the query you can download
displayed records.
EXPLANATION OF SYMBOLS
The lightning symbol indicates a health hazard, e.g., an electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which absolutely have to be observed.
The arrow symbol is used to indicate where specific tips and information on handling
should be given.
The product is only intended to be installed and used in dry, indoor spaces; it must
not get damp or wet.
Observe the operating instructions!
SAFETY INSTRUCTIONS
Damages due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
We do not assume any liability for personal injuries and material damages
caused by the improper use or non-compliance with the safety instructions!
In such cases, the warranty will be null and void.
Dear Customer, the following safety instruction is intended not only for the protec-
tion of your health, but also for the protection of the product.
Therefore, please read the following points very carefully before connecting and
using the product for the first time.
a) General
• The unauthorised conversion and/or modification of the product is not permitted
for safety and approval reasons (CE). Never dismantle the product.
• Maintenance, adjustment, or repair work should be carried out only by a special-
ist/specialist workshop.
• Do not leave packaging material carelessly lying around, as it could become a
dangerous plaything for children.
• Also observe the safety and operating instructions of all other devices that are
connected to the USB charging station.
• If in doubt about how to connect the device correctly, or should any questions
arise that are not answered in these operating instructions, please contact us or
another specialist.
b) Power adapter/power cable
VERSION 02/16
• The design of the power adapter complies with class II safety requirements.
• The mains socket at which the power pack is connected must be easily acces-
sible.
• Do not pull the mains plug from the mains socket by pulling on the cable.
• Protect the power adapter/mains cable from damage.
• If the power adapter/mains cable is damaged, do not touch it; there is danger to
life from electric shock!
First, switch off the mains voltage to the socket to which the power adapter is
connected (switch off at the corresponding circuit breaker or, for example remove
the safety fuse, and then switch off the fault-current circuit breaker, so the socket
is fully disconnected).
Only then pull the mains plug of the power adapter out of the socket. Do not use
the power adapter/mains cable any more; rather, dispose of it in an environmental
friendly manner.
A damaged power cord can be replaced by a new power cable of the same type.
c) Installation site
• The complete product is intended for use in dry, indoor locations only. No part of
the product should become damp or wet; never handle it if your hands are wet! A
power adapter/power cable carries the risk of a potentially fatal electric shock!
• Select a stable, flat, clean, sufficiently large place for the USB charging station.
• Do not place the USB charging station on a flammable surface (e.g. carpet,
tablecloth). Always use a suitable, non-flammable, heatproof base.
• Do not place the USB charging station on surface of valuable furniture without
suitable protection. The impact of heat could lead to colour or material changes.
Scratches or pressure points may occur on the furniture surface.
• Keep the device away from easily flammable materials (e.g. drapes, paper),
liquids (e.g. gasoline) or gases. There is a risk of fire and explosion!
• Avoid direct sunlight, strong heat or cold. Keep the product away from dust and
dirt.
• Do not use in the immediate vicinity of strong magnetic or electromagnetic fields,
transmitter aerials or RF generators. This can impact the electric control system.
• Make sure that the cable is not pinched or damaged by sharp edges.
d) Operation
• This product is not a toy. Devices operated on mains voltage should not be used
by children. Therefore, be especially careful when children are around.
Use the product where it is out of the reach of children.
• Install all cables in such a way that nobody may trip over them.
• Handle the product with care; it can be damaged by impacts, blows, or accidental
falls, even from a low height.
• Avoid the following unfavourable ambient conditions at the installation point or
during transportation or storage:
- dampness or excessive humidity
- extreme cold or heat, direct sunlight
- dust or flammable gasses, fumes or solvents
- strong vibrations, impacts, or blows
- strong magnetic fields such as those found in the vicinity of machinery or
loudspeakers
• Never use the product immediately after it has been brought from a cold room
into a warm one. The resulting condensation may lead to malfunctions or damage
under certain circumstances! The power adapter/power cable/mains plug also
poses an associated risk for electric shock!
Wait until the product has reached room temperature before connecting the power
adapter to the mains and using the product. This may take several hours!
Publicité
