Publicité
Les langues disponibles
Les langues disponibles
DIP number
10+1
10+2
10+3
10+2+1
10+3+1
10+3+2
10+3+2+1
10+8
10+8+1
10+8+2
10+8+3
10+8+2+1
10+8+3+1
10+8+3+2
10+8+3+2+1
10+9
10+9+1
10+9+2
10+9+3
10+9+4
10+9+5
10+9+6
10+9+2+1
10+7
10+7+1
10+7+2
10+7+3
10+7+4
10+7+5
Appendix
1. Usage of the Signal Cable. Connector
The connection between the output and input, it's available to use the 3 pins XLR cable which provided by the
manufacturer. Signal cable from the DMX output of the controller to the input of the first master light, and connect
to the DMX input of second slave light from the DMX output of the first master light, analogously till connected all
the slave lights, and insert the last connector to the output of the final light.
If you want to prolong the connection of signal cable, the connection of the pins between male connector and
female connector should be:1 to 1; 2 to 2; 3 to 3,or it will cause communication interruption. Notice: the diameter
of core of every cable should be 0.5mm at least double core shelter cable should be used. The signal connecting
must use the attached 3 pins XLR cable. Notice, all the internal lead wire of the 3 pins XLR cable should not touch
to each other or connect to the connector.
The light is available to receive the DMX512 signal, connect the signal plug to the panel which marked with "IN"
and connect it to the next light. then, connect to the "IN" of next light from the "OUT". The DMX signal terminal
organ is recommended when the lighting signal is connecting. It will avoid to damage the signal which caused by
the noise, DMX terminal organ is a XLR connector, connect with a 120Ω resistor between the pin 2 and pin 3 of
the XLR connector, and connect it to the last OUTPUT socket of the final light. Follow picture:
IN
OUT
Function description
R
G
B
R+G
R+B
G+B
R+G+B
Auto running
R shade
G shade
B shade
RGB shade speed 1 fast
RGB shade speed 2
RGB shade speed 3 slow
R+G+B shade
RGB change each other
R strobe
G strobe
B strobe
R+B strobe
R+G strobe
G+B strobe
R+G+B strobe(speed
adjustment)
Sound control1
Sound control2
Sound control3
Sound control4
Sound control5
Sound control6
IN
remark
Fixed color (away brightness)
Auto running show(include shade. strobe. change
color and so on)
Shade
Strobe
(DIP3-DIP7) adjustment strobe speed
OUT
5
IN
OUT
© Copyright Lotronic 2009
120R
Publicité
