Ibiza Light LED MUSHROOM EFFECT Manuel D'utilisation page 2

Preface
Thank you for using our LED mushroom IBIZA LIGHT. For your safety, please read the User's Manual carefully
before your operation.
Note:This Manual includes the important information of installation, operation and safety instruction. Please install
and operate as requested in the Manual, meanwhile, please keep the manual for any unexpected requirement.
This Manual includes the important information of installation and operation. Please install and operate the light
according to the instructions strictly. And it must be power off when open the light or before repair.
A. Please read the complete contents of this manual. please keep this manual attach with the light for any
preview
B: In order to make sure the correct and safety installation. operation and maintenance, well know and follow to
the instructions of Manual is necessary.
C We will not take any responsibility to the light damage. property loss or body injure which caused by the
incorrect installation. operation and maintenance.
NOTICE: The data which inside the Manual maybe changed due to the continuous improvement, and we'll not
make another notice. We will keep the right to any specification update during improvement
Warning: If the protection screen. Lens or UV screen got a visible damage, e.g. scratch or chasm.
Unpacking Instructions
Please check if all the contents are completed after unpacking, then, check if the light is undamaged. Please you
can keep the original package and return to the factory if it's damaged
3. AC Power: Check if the voltage is accordance with the rated power.
4. Safety Specifications: All the safety items of operation (includes installation) and before operating.
 Unpacking the light case and take out all the accessories and open the poly package, take out the light from
the flight case, and put it in a certain platform for operation.
 This device for indoor use only. The protection grade is: IP20. The light must keep dry and avoid to use under
the Moist. Overheat or Dusty surroundings. And keep the light far away from the water or other liquid.
 Installing of the light must keep a distance with any flammable objects by 1M at least.
 Please never install the light on the surface of the flammable objects.
 The installation, operation and maintenance must be managed by the qualified professional, and make sure to
operate it under the instruction of the Manual.
 Make sure the work environment temperature of the light maximum 45°, and minimum -15°C
 The temperature of the light surface will up to 130°C even under the normal cooling, so never touch it by
hand.
 The light was designed by electric shock protection type, and must connect to the power supply system which
well earthed. Furthermore, the ground wire of the light must connect to the ground wire of the power supply
system, ground wire interface of the light must well connect with the light body (or light must well earthed)
 Please check if the voltage is accordance with the rated power before installing.
 Please never use the power cable which was damaged the insulation cover, meanwhile; never put the power
cable on any other wire. Please pull out the power cable by handle the plug when light is stop working or
cleaning, never pull out it roughly or handle the wire directly.
 The light doesn't include any spare parts for repair; please check if all the parts are well installed and screws
are drove tightly before operating. It's prohibited to use the light when the cover is opened.
Notice: Please make sure it's power off before any installation. repair and clean!
1. Introduction
2. Technical Features
(1) Control channel: 9 DMX channels
(2) Color: RGB three basic color, color shade
(3) Operating modes: standard DMX512 controller control mode
(4) Other function: rotate angle 180o , master and slave mode, sound control
(5) Appearance: metal shell, streamlined designs.
(6) Working environment: indoor, -15
(7) IP degree: IP20
GB
~ 40
2 © Copyright Lotronic 2009