Before setting me to work, please read this check list carefully.
1
B
2
.
Press the On/Off button.
1
The pilot light
1
.
Select Programme
2
To select a wash programme, simply turn the selector knob
programme you want to use. When you have selected the programme, the pilot light
corresponding to this programme will light up. For easy control of the wash phases,
6
a pilot light
(only in type A models) will also go on, indicating the current wash phase.
10
There is also a DISPLAY
duration of the programme or the time left for it to finish.
37
START-UP CHECK LIST
PROGRAMME SELECTION
Easy programming and control.
1
A
2
2
goes on.
(depending on model) which shows either the estimated
8
1. Check that I've been plugged in and that the
electricity supply master swich is on.
2. Open the water shut-off valve.
3. Check the salt level (if necessary) and the rinse
aid level.
4. Place the dishes in the dishwasher as shown.
5. Fill the dispenser with detergent.
8
6
14
13
15
8
9
10
13
9
14 13
6
9
to the position for the
8
9
15