SEFRAM 7803B Manuel D'utilisation page 26

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If the installation did not go well, an exclamation mark appears on the « USB <> Serial » line or on the
« USB serial port (COMX) » line and indicates a malfunctioning of the interface.
It is important that you remember to which USB port the cable is connected.
Always connect the appliance to the same port in order to avoid reinstalling
the driver or changing the COM port number.
Updating of the internal software
The internal software can be easily updated to get new features developed by SEFRAM
The last revision of software is available on SEFRAM web site www.sefram.fr.
Instructions for use:
Download from our web site (www.sefram.fr) , the update software of your product.
Connect your instrument to your PC with a USB link.
Press the Parameters key
Keep pressing the Parameters key and switch on the instrument (the backlight comes on).
Run FLASHWIN on your PC.
You can clic on your country flag to change the language.
Configure the USB link by choosing the right COM port (to find the right COM port for the
appliance see above). Then launch loading (click on the yellow « smiley »)
A bargraph indicates the progress of the transfer.
Switch off the instrument and switch it on again. The number of the new software version
appears on the welcome screen.
– 7802/3/4 –
.
p. 26
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7804b

Table des Matières