SEFRAM 7803B Manuel D'utilisation page 23

With the Save key you will be able to store tables,
measurements and the spectrum to be checked.
1 – SAVE OF THE TABLES
Please enter first the parameters screen
And then press the Save key
The instrument gives a default file name to the table: « PLACE: name you have given to the
place » or « PLACE: PLACExxx » if you have not given it a name yet. This name can be
modified later.
In order to find out it faster, the table can be saved for example under the name
of the place.
Tables can also be made with the TR7836 transfer software and be downloaded
in the instrument.
2 - SAVE OF MEASUREMENTS
Please enter first a Measure screen
And press the Save key
The instrument gives a default file name to the measure: « MEASURE: MEMOxxxx » that can be
changed.
Both parameters and results of measures are memorized allowing you to recall these data after.
If necessary, you can transfer the saved measures to your PC with the TR7836
transfer software and create some measurement reports on it.
3 – RECALL OF THE TABLES AND MEASURES
You need to press the Configuration key
– 7802/3/4 –
SAVE
.
.
(it is not possible to save a constellation measure).
.
. (Refer to « Configuration »)
p. 23