SEFRAM 7803B Manuel D'utilisation page 18

A press on the Configuration key allows you to:
−
Select the frequency map corresponding to the
country or region in which you operate the
instrument. This allows you to have the right
correspondence between frequency, channel and
standard.
It is necessary to choose the frequency map corresponding to the region in which the
instrument is operated before using it in order to have the right correspondence
between frequency and channel.
−
Choose the Unit of Measure, used for all the measures
−
Set the date and time, what is useful to date stamp the measures (e.g. to put the clocks
forward)
−
Validate (manually) the remote supply (24 V), the voltage and the current are displayed
(if the option is available)
−
Recall or delete the previously saved tables and measures.
A second press on the Configuration key allows you to access to the advanced
configuration mode. It is here possible to:
−
Choose the language.
−
Validate the sounds (beep).
−
Select the LCD display backlight: OFF (always
switched off), ON (always switched on), AUTO (to save
the rechargeable batteries, the light will be automatically
switched off after 5 minutes without any operation).
−
Validate the « auto power off » mode. To save the rechargeable batteries, the
instrument will stop automatically after 10 minutes without any operation.
– 7802/3/4 –
CONFIGURATION
p. 18