Great Outdoors SMOKY MOUNTAIN Serie Instructions D'assemblage page 9

ASSEMBLY INSTRUCTIONS
4. Place spring washer (CC) and short bolt (AA) through
center hole of the damper vent with guard (F) and
and attach to top of the cabinet (A) and tighten. Be
sure not to overtighten damper vent with guard (F)
as it must be able to turn for adjustment.
Hardware Used
M5 x 12 mm Short bolt
AA
Spring washer
CC
5. Insert the flat washer (DD) and long bolt (EE)
through the door (B) and partially fasten to handle (J).
Once fastened, securely tighten both long bolts (EE).
Hardware Used
M5 x 45 mm Long bolt
EE
Flat washer
DD
6. Insert the flat washer (DD) and long bolt (BB)
through the top drawer front panel (P) and partially
fasten to handle (J). Once fastened, securely tighten
both long bolts (BB). Insert the flat washer (DD)
and long bolt (BB) through the bottom drawer front
panel (R) (not shown) and partially fasten to handle (J).
Once fastened, securely tighten both long bolts (BB)
Hardware Used
M5 x 50 mm Long bolt
BB
Flat washer
DD
4
x 1
x 1
5
x 2
x 2
6
x 2
x 2
9
AA
CC
A
DD
EE
A
DD
BB
P
A
F
J
J