Storing Stations In Memory - JVC KS-FX43R Manuel D'instructions

Storing stations in memory

You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
1
Select the FM band (FM1 – 3) you
want to store FM stations into.
FM1
FM
2
Press and hold both buttons for
more than 2 seconds.
KS-FX43R
SSM
KS-FX483R
KS-FX480R
"- -SSM- -" appears, then disappears
when automatic preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons—
No.1 (lowest frequency) to No.6 (highest frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
FM2 FM3
KS-F383R
SSM
KS-F380R
Manual preset
You can preset up to 6 stations in each band
(FM1, FM2, FM3, and AM) manually.
Ex.: Storing FM station of 88.3 MHz into the
preset number 1 of the FM1 band.
1
Select the band (FM1 – 3, AM) you
want to store stations into (in this
example, FM1).
FM1
FM
AM
AM
2
Tune in to a station (in this example,
of 88.3 MHz).
To tune in to stations of higher frequencies
KS-FX43R
KS-FX483R
KS-FX480R
To tune in to stations of lower frequencies
CONTINUED ON THE NEXT PAGE
FM2 FM3
KS-F383R
KS-F380R
9