Other Convenient Rds Functions And Adjustments - JVC KS-FX43R Manuel D'instructions

To search your favorite programme type
1
Press and hold TP/PTY for more than
2 seconds while listening to an FM
station.
KS-FX43R
TP/PTY
KS-FX483R
KS-FX480R
The last selected PTY code appears.
2
To select one of your favorite
programme type
or
To select any one of the twenty-nine
PTY-codes
Ex.: When "ROCK M" is selected
3
¢ / 4
Press
KS-FX483R/KS-FX480R) or
KS-F383R/KS-F380R) to start PTY
search for your favorite programme.
KS-FX43R
KS-FX483R
KS-FX480R
• If there is a station broadcasting a programme
• If there is no station broadcasting a programme
KS-F383R
TP
PTY
KS-F380R
Note:
In some areas, the PTY search will not work correctly.
Other convenient RDS
functions and adjustments
Automatic selection of the station
when using the number buttons
Usually when you press the number button, the
preset station is tuned in.
However, when the preset station is an RDS
station, something different will happen. If the
signals from that preset station are not sufficient
for good reception, this unit, using the AF data,
tunes in to another frequency broadcasting the
same programme as the original preset station is
broadcasting. (Programme search)
• The unit takes some time to tune in to another
To activate programme search, follow the
procedure below.
1
(for KS-FX43R/
2
/ (for
3
KS-F383R
4
KS-F380R
To cancel programme search, repeat the same
procedure and select "OFF" in step 3 by pressing –.
of the same PTY code as you selected, that
station is tuned in.
of the same PTY code as you selected, the
station will not change.
station using programme search.
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items
appears on the display. (See page 22.)
¢ / 4
Press
KS-FX483R/KS-FX480R) or
KS-F383R/KS-F380R) to select
"P(Programme)-SEARCH."
Press + to select "ON."
Now programme search is activated.
Press SEL (select) to finish the setting.
(for KS-FX43R/
/ (for
15